BELLARI RP520 DUAL TUBE MIC PREAMP Review
Buy From Amazon.com
BELLARI RP520 DUAL TUBE MIC PREAMP Feature
- HIGH 250 VOLT PLATE VOLTAGE
- LOW NOISE STUDIO MIC PREAMP
- WARM VERY TRANSPARENT TUBE SOUND
Description
Great tube mic preamp, identical to the RP220 except for the analog meters, lower noise floor, and sexy gold face plate. It has been included on several album credits and is present in most major studios in LA, Nashville, and New York. It has the smooth yet punchy characteristics that drive vocal tracks to the front, warm up any digital mix, and yields up to 6 dB more gain before feedback for the live user. The pristine sound is achieved by running the tubes at a high 250 volt plate voltage.
In Depth
INPUT Standard XLR type balanced inputs, pin 2 is hot, for Mic or line-level audio sources. (e.g., instrument, microphone or mixer).
OUTPUT JACKS 1/4" phone connectors or balanced XLRs used for connection to your line inputs on your load (e.g., DAT, Amp. or mixer).
30 dB Pad This switch changes the level of the Output XLR jack only. When in, it attenuates the output level by 30 dB.
PHASE REVERSE When pressed in, reverses the phase of the output signal 180 degrees from the input signal.
Frequency Response: 20Hz - 40kHz, +/- 3dB Mic/Line 5Hz - 40kHz inst.
Input Impedance: 600 ohm balanced XLR 1M ohm Instrument
THD: 0.1% typical
S/N Ratio: >107 dB
Max Gain: 48dB Inst or line, 70dB XLR
Indicators: 2 - LEDs (Phantom Power) 2 - Backlit Analog Meters
Input/Output jacks: XLR balanced and 1/4"
Dimensions: 3.5" X 6" X 19" (89mm X 162mm X 482mm)
Power: 120VAC (230VAC) 15VA
Buy From Amazon.com
